unit ucadModeloRepasse;

interface

uses
  Winapi.Windows, Winapi.Messages, System.SysUtils, System.Variants,
  System.Classes, Vcl.Graphics, Vcl.Buttons, System.UITypes,
  Vcl.Controls, Vcl.Forms, Vcl.Dialogs, umstCadastro, Data.DB, Vcl.Grids,
  Vcl.DBGrids, Vcl.ExtCtrls, Vcl.DBCtrls, Vcl.StdCtrls, Vcl.Mask, Vcl.ComCtrls,
  System.ImageList, Vcl.ImgList;

type
  THackDBNavigator = class(TDBNavigator);

type
  TcadModeloRepasse = class(TmstCadastro)
    dbg_repasse: TDBGrid;
    gb_porcentagens: TGroupBox;
    lbl_principal: TLabel;
    dbedt_prprin: TDBEdit;
    dbedt_prjuros: TDBEdit;
    lbl_juros: TLabel;
    dbedt_prmulta: TDBEdit;
    lbl_multa: TLabel;
    dbedt_enc: TDBEdit;
    lbl_encargos: TLabel;
    dbedt_prcorrigido: TDBEdit;
    lbl_corrigido: TLabel;
    ImageList1: TImageList;
    GroupBox1: TGroupBox;
    dblulb_indices: TDBLookupListBox;
    dtsfases: TDataSource;
    navfases: TDBNavigator;
    dbedt_atrasomin: TDBEdit;
    dbedt_atrasomax: TDBEdit;
    lbl_atrasomin: TLabel;
    lbl_atrasomax: TLabel;
    GroupBox3: TGroupBox;
    Label1: TLabel;
    Label2: TLabel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    DBEdit2: TDBEdit;
    DBEdit3: TDBEdit;
    DBEdit4: TDBEdit;
    DBEdit5: TDBEdit;
    DBEdit6: TDBEdit;
    procedure dbedt_prprinKeyPress(Sender: TObject; var Key: Char);
    procedure dbedt_prjurosKeyPress(Sender: TObject; var Key: Char);
    procedure dbedt_prmultaKeyPress(Sender: TObject; var Key: Char);
    procedure dbedt_encKeyPress(Sender: TObject; var Key: Char);
    procedure dbedt_prcorrigidoKeyPress(Sender: TObject; var Key: Char);
    procedure navPrincipalBeforeAction(Sender: TObject; Button: TNavigateBtn);
    procedure FormCreate(Sender: TObject);
    procedure dbedt_prprinExit(Sender: TObject);
    procedure dbedt_prjurosExit(Sender: TObject);
    procedure dbedt_prmultaExit(Sender: TObject);
    procedure dbedt_encExit(Sender: TObject);
    procedure dbedt_prcorrigidoExit(Sender: TObject);
    procedure dtsDBStateChange(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormKeyDown(Sender: TObject; var Key: Word; Shift: TShiftState);
    procedure dtsfasesStateChange(Sender: TObject);
    procedure navfasesBeforeAction(Sender: TObject; Button: TNavigateBtn);
    procedure DBEdit2Exit(Sender: TObject);
    procedure DBEdit3Exit(Sender: TObject);
    procedure DBEdit4Exit(Sender: TObject);
    procedure DBEdit5Exit(Sender: TObject);
    procedure DBEdit6Exit(Sender: TObject);
    procedure DBEdit2KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit3KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit4KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit5KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit6KeyPress(Sender: TObject; var Key: Char);
  private
    procedure SetupHackedNavigator(const Navigator: TDBNavigator;
      const Glyphs: TImageList; S: string);
    procedure WMMoving(var Msg: TWMMoving); message WM_MOVING;
    { Private declarations }
  public
    { Public declarations }
  end;

  // janela a princípio não utilizada até hoje
var
  cadModeloRepasse: TcadModeloRepasse;

implementation

{$R *.dfm}

uses udtmSystem;

procedure TcadModeloRepasse.DBEdit2Exit(Sender: TObject);
begin
  inherited;
  if DBEdit2.Field.Value > 100 then
  begin
    DBEdit2.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.DBEdit2KeyPress(Sender: TObject; var Key: Char);
begin
  inherited;
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, DBEdit2.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.DBEdit3Exit(Sender: TObject);
begin
  inherited;
  if DBEdit3.Field.Value > 100 then
  begin
    DBEdit3.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.DBEdit3KeyPress(Sender: TObject; var Key: Char);
begin
  inherited;
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, DBEdit3.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.DBEdit4Exit(Sender: TObject);
begin
  inherited;
  if DBEdit4.Field.Value > 100 then
  begin
    DBEdit4.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.DBEdit4KeyPress(Sender: TObject; var Key: Char);
begin
  inherited;
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, DBEdit4.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.DBEdit5Exit(Sender: TObject);
begin
  inherited;
  if DBEdit5.Field.Value > 100 then
  begin
    DBEdit5.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.DBEdit5KeyPress(Sender: TObject; var Key: Char);
begin
  inherited;
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, DBEdit5.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.DBEdit6Exit(Sender: TObject);
begin
  inherited;
  if DBEdit6.Field.Value > 100 then
  begin
    DBEdit6.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.DBEdit6KeyPress(Sender: TObject; var Key: Char);
begin
  inherited;
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, DBEdit6.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.dbedt_encExit(Sender: TObject);
begin
  if dbedt_enc.Field.Value > 100 then
  begin
    dbedt_enc.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.dbedt_encKeyPress(Sender: TObject; var Key: Char);
begin
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, dbedt_enc.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.dbedt_prcorrigidoExit(Sender: TObject);
begin
  if dbedt_prcorrigido.Field.Value > 100 then
  begin
    dbedt_prcorrigido.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.dbedt_prcorrigidoKeyPress(Sender: TObject;
  var Key: Char);
begin
  // método pra só poder digitar números e "." ou "," no edit
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator, '-']) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, dbedt_prcorrigido.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.dbedt_prjurosExit(Sender: TObject);
begin
  if dbedt_prjuros.Field.Value > 100 then
  begin
    dbedt_prjuros.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.dbedt_prjurosKeyPress(Sender: TObject;
  var Key: Char);
begin
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, dbedt_prjuros.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.dbedt_prmultaExit(Sender: TObject);
begin
  if dbedt_prmulta.Field.Value > 100 then
  begin
    dbedt_prmulta.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.dbedt_prmultaKeyPress(Sender: TObject;
  var Key: Char);
begin
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, dbedt_prmulta.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.dbedt_prprinExit(Sender: TObject);
begin
  if dbedt_prprin.Field.Value > 100 then
  begin
    dbedt_prprin.Field.Value := 100;
  end;
end;

procedure TcadModeloRepasse.dbedt_prprinKeyPress(Sender: TObject;
  var Key: Char);
begin
  if not(Key in [#8, '0' .. '9',
    System.SysUtils.FormatSettings.DecimalSeparator]) then
  begin
    Key := #0;
  end
  else if (Key = System.SysUtils.FormatSettings.DecimalSeparator) and
    (Pos(Key, dbedt_prprin.Field.Text) > 0) then
  begin
    Key := #0;
  end;
end;

procedure TcadModeloRepasse.dtsDBStateChange(Sender: TObject);
begin
  dblulb_indices.Enabled := not(dtsDB.DataSet.State in [dsEdit, dsInsert]);
  grpDescricao.Enabled := (dtsDB.DataSet.State in [dsEdit, dsInsert]);
  // gb_porcentagens.Enabled := grpDescricao.Enabled;
  // dbg_repasse.ReadOnly := not(dtsDB.DataSet.State in [dsEdit, dsInsert]);
  // navfases.Enabled := not(dtsDB.DataSet.State in [dsEdit, dsInsert]);
  pcClientes.Enabled := not(dtsDB.DataSet.State in [dsEdit, dsInsert]);
  GroupBox3.Enabled := grpDescricao.Enabled;
end;

procedure TcadModeloRepasse.dtsfasesStateChange(Sender: TObject);
begin
  inherited;
  grpDescricao.Enabled := not(dtsfases.DataSet.State in [dsEdit, dsInsert]);
  navPrincipal.Enabled := not(dtsfases.DataSet.State in [dsEdit, dsInsert]);
  gb_porcentagens.Enabled := dtsfases.DataSet.State in [dsEdit, dsInsert];
  dbg_repasse.ReadOnly := not(dtsfases.DataSet.State in [dsEdit, dsInsert]);
  dblulb_indices.Enabled := not(dtsfases.DataSet.State in [dsEdit, dsInsert]);
end;

procedure TcadModeloRepasse.FormClose(Sender: TObject;
  var Action: TCloseAction);
begin
  inherited;
  cadModeloRepasse := nil;
end;

procedure TcadModeloRepasse.FormCreate(Sender: TObject);
begin
  inherited;
  if not dtmSystem.tblRepasse.Active then
  begin
    dtmSystem.tblRepasse.Open;
  end;
  if not dtmSystem.tblRepasseFase.Active then
  begin
    dtmSystem.tblRepasseFase.Open;
  end;
  SetupHackedNavigator(navPrincipal, ImageList1, 's');
  SetupHackedNavigator(navfases, ImageList1, 's');
end;

procedure TcadModeloRepasse.FormKeyDown(Sender: TObject; var Key: Word;
  Shift: TShiftState);
begin
  inherited;
  if Key = VK_ESCAPE then
  begin
    Key := 0;
    Close;
  end;
end;

procedure TcadModeloRepasse.navfasesBeforeAction(Sender: TObject;
  Button: TNavigateBtn);
begin
  case Button of

    nbPost:
      begin
        if dbedt_atrasomin.Text = '' then
        begin
          MessageDlg('Por favor preencha um número para o atraso mínimo.',
            mtWarning, [mbOK], 0);
          abort;
        end;
        if dbedt_atrasomax.Text = '' then
        begin
          MessageDlg('Por favor preencha um número para o atraso máximo.',
            mtWarning, [mbOK], 0);
          abort;
        end;

        if strtoint(dbedt_atrasomin.text) > strtoint(dbedt_atrasomax.text) then
        begin
          MessageDlg('Há uma inconsistência nos valores do atraso. Por favor reveja-os.',
            mtWarning, [mbOK], 0);
          abort;
        end;
        // SelectNext(ActiveControl as TWinControl, True, True);
      end;

    nbCancel:
      if MessageDlg('Deseja cancelar as modificações?', mtConfirmation,
        [mbYes, mbNo], 0) = mrNo then
        abort;
  end;
end;

procedure TcadModeloRepasse.navPrincipalBeforeAction(Sender: TObject;
  Button: TNavigateBtn);
begin
  inherited;
  //
end;

procedure TcadModeloRepasse.SetupHackedNavigator(const Navigator: TDBNavigator;
  const Glyphs: TImageList; S: string);
const
  Captions: array [TNavigateBtn] of string = ('Primeiro', 'Anterior', 'Próximo',
    'Último', 'Adicionar', 'Excluir', 'Alterar', 'Confirmar', 'Cancelar',
    'Atualizar', 'Aplicar Atualizações', 'Cancelar Atualizãções');
  (* Captions : array[TNavigateBtn] of string =
    ('First', 'Prior', 'Next', 'Last', 'Insert',
    'Delete', 'Edit', 'Post', 'Cancel', 'Refresh'); *)
  Hints: array [TNavigateBtn] of string = ('Primeiro', 'Anterior', 'Próximo',
    'Último', 'Adicionar', 'Apagar', 'Modificar', 'Confirmar', 'Cancelar',
    'Atualizar', 'Aplicar Atualizações', 'Cancelar Atualizãções');
var
  btn: TNavigateBtn;
begin
  // função propriamente dita para "hackear" o navigator
  for btn := Low(TNavigateBtn) to High(TNavigateBtn) do
    with THackDBNavigator(Navigator).Buttons[btn] do
    begin
      // from the Captions const array

      Hint := Hints[btn];

      if LowerCase(S) = 's' then
      begin
        Caption := Captions[btn];
      end;

      // the number of images in the Glyph property
      NumGlyphs := 1;
      // Remove the old glyph.
      Glyph := nil;
      // Assign the custom one
      Glyphs.GetBitmap(Integer(btn), Glyph);
      // gylph above text
      Layout := blGlyphTop;

      Font.Style := Font.Style - [fsbold];
    end;
end;

procedure TcadModeloRepasse.WMMoving(var Msg: TWMMoving);
var
  workArea: TRect;
begin
  workArea := Screen.WorkareaRect;

  with Msg.DragRect^ do
  begin
    if left < workArea.left then
      OffsetRect(Msg.DragRect^, workArea.left - left, 0);

    if top < workArea.top then
      OffsetRect(Msg.DragRect^, 0, workArea.top - top);

    if Right > workArea.Right then
      OffsetRect(Msg.DragRect^, workArea.Right - Right, 0);

    if Bottom > workArea.Bottom then
      OffsetRect(Msg.DragRect^, 0, workArea.Bottom - Bottom);
  end;

end;

end.